Augers are available with center delivery for trailers of all lengths. The clearance underneath auger system after installation is 14" on most trailers.    The hydraulic requirement is 15 G.P.M. with a 2500 P.S.I. bypass. Unloading rate of the 8"auger system is approx. 40 bushels per minute per auger, and for  a 10" auger system 80 bushels per minute per auger.

The down spouts are attached to a 8" or 10" auger systems. This hopper auger system is mounted so that the auger heads do not protrude past the side of the trailer.

This 5.9 cubic inch hydraulic motor    comes with a flow control valve to regulate speed.   .

The hopper augers are easily detached by removing 5 bolts. The trap door can be opened to allow for easy unloading at elevator.

Optional electric solenoids are available       with electric switch or wireless remote.

By not having to leave the top of the air-seeder tank, the Michel's wireless remote truly makes filling an air seeder a "One Man Operation"

This system can be used as a transfer auger in the fall. Unloading with both 8 "hopper augers" will keep up to a 10"transfer auger, and running one 8"hopper auger will keep up to an airseeder auger.  Running two 10" hopper augers will keep up to a 13"transferr auger.

The hydraulic motor can be powered by connecting in series with the existing hydraulic line on  the  air-seeder auger, or off a wet kit on the semi tractor unit

No guess work! Drive along side your air-seeder auger hopper

Total weight of one set of steel 8"hopper augers is 250 lbs vs. aluminum at 175 lbs. The weight of steel 10" hopper augers is 400 lbs vs aluminum at 250lbs. The specially designed gearboxes have a shaft angle and ball bearings to provide years of dependable service.